Can you believe it? This wire saw machine that's currently cutting stones has been in operation for 8 years. It's a wire saw machine produced by our factory in April 2018. Just last month, it celebrated its 7th birthday and has now entered its 8th year. What enables it to still be in good condition and keep working on the quarrying front after 8 years of exposure to the elements in the quarry? Apart from its good quality, there's another very important reason. That is, its owner conducts a pre - startup inspection every time before starting the machine.

Hello, everyone. I'm Oliver Mo, who manufactures and sells wire saws. If you also hope that your wire saw machine can maintain good mechanical condition for a long time, then I strongly recommend that you must understand the 'Ten Pre - startup check for Wire Saw Machines':

1. 1. Before starting the machine, check the wear of the tapes on the power flywheel and the guide wheel. If there's significant wear, replace them in time.

2. 2. Before starting the machine, check the power cable and control cable at the mobile end. If there are any damages or electrical leaks, wrap them up or replace them immediately. When sawing, adjust the position of the cables as the machine moves to prevent them from being crushed.

3. 3. Before starting the machine, check if the heat - dissipation cover of the main motor is unobstructed. If it's blocked, clear it immediately to avoid affecting the heat - dissipation of the main motor and prevent cooling water from entering the main motor through the heat - dissipation opening and causing a short - circuit.

4. 4. Regularly check the straightness and firmness of the rails. Clean the rail joints regularly and apply grease to prevent rusting.

5. 5. Regularly check if the guide wheel rotates flexibly and if the bracket is firm.

6. 6. Keep the door of the wire saw machine cabinet closed to prevent moisture and dust from entering and damaging the electrical equipment. Keep the inside of the control box clean. If the machine is not used for a long time, dry the electrical control box and the mobile control console.

7. 7. Inject cooling water in the direction of the Diamond Wire Saw cutting. The water volume and the water - adding position should be appropriate. Water - cut - off operation is strictly prohibited.

8. 8. Rotate the automatic oil - filling cylinder 1 - 2 turns clockwise every half - month to automatically lubricate the moving parts of the power head and prevent rusting. Regularly add anti - wear hydraulic oil.

9. 9. Check the oil level of the walking reduction gear every month. Check the lubrication of the main motor and the walking motor and replenish the lubricating oil in time.

10. 10. When the sawing work is finished, disconnect the power supply in time and clean the whole machine.

The above is the entire content of the 'Ten Pre - startup check for Wire Saw Machines'. A wire saw machine is like your beloved car. As long as you take good care of it, electromechanical products generally don't break down easily. It can last for 8 or 10 years without any problem.

Finally, I'm Oliver Mo, who manufactures and sells wire saws. I hope to be your partner on the stone - quarrying journey. If you encounter any problems when buying a wire saw, you can contact me privately. See you in the next video.